Products Mask
Scope of Application: This product is suitable for the protection of dust, smoke and other particulate air pollutants, it also has a good respiratory protective function for viruses or respiratory diseases.
Executive Standard: GB 2626-2006
Code, Specification: C005, KN95
Manufacturing Date: Please refer to the label
Validity Date: Four years from the date of the manufacturing
Storage: Stored at room temperature, away from humidity and contaminants.
1. Place fingers inside the particle filtering half mask. Bend the nose clip around the fingers to form the nose shape.
2. Hold the particle filtering half mask in position over the nose and mouth, pull the head harness behind the ears.
3. Using both hands, form the nose clip around the nose and shift the head harness to ensure a positive face seal.
4. Fit check
a. To test the fit of the particle half mask without an exhalation vevel, cup both hands over mask and inhale sharply.
b. If air flow is felt in the nose area, re-adjust / tighten the nose clip.
c. If air flow is felt around the edges of the mask, reposition the particle half mask / head harness to achieve a better fit.
5. Change the mask immediately if breathing becomes difficult or the mask becomes damaged or distorted.
6. Change the mask if a proper face seal cannot be achieved.
7. Careful observance to these instructions is an important step in safe respirator use.
1. Pay attention to the validity period of the product. Please use it within the validity period.
2. The protective mask shall not be cleaned or disinfected. It shall not be used for a long time and shall be destroyed after use.
3. No use if package is damaged.
4. Use with caution if you are allergic to nonwovens.
Manufacturer: Chengdu BAIYU Medical Supplies Co., Ltd.
Address: No. 433, West section of Liutai Avenue, Cross-strait Science and Technology Development Industry Park, Wenjiang District, Chengdu City , Sichuan Province, China.
Tel. No.: + 86-028-61683990-8088 | + 86-028-61683991-8088